Anycubic Kobra 2 Max Belt Locks
Anycubic Kobra 2 Max Belt Locks
Print Profile(0)
Description
Never worry about your belt knobs vibrating themselves loose again.
Easy Install set your belts to desired tightness.
Then pop this cap over your existing one. Easy as that.
Printing:
20 to 25 infill / with paint on supports on on wings and inner top see pic.
Note: (The first placement of part will be tight right off the printer. But will settle in by design and be a perfect fit for your knob going on and off easily. Had to do this if people decided to use PETG over PLA. PETG is rougher at a micron level will have more friction. This is what smooths out as you use the part.
Description of Models:
Y-Belt Lock_v1: Wings on both sides
X-Belt Lock: I gave you two options for lock placement. Cause like me you may want to mount a camera in that area or accessories.
X-Belt Lock _Top or Bottom Wing_v1 : Lock placement is at the Top or Bottom
X Belt Lock Front or Back Wing_v1: Lock placement is at the Front or Back
Open Face Models: I also included open face models of the above in a separate folder if you don't want the Logo.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
