PUZZLE - Millennium Falcon by Canadian Gamer

Canadian Gamer

Toys & Games>Puzzles

GIF

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

Adaptive Layers, MF 100% infill

Designer

10.8 h

1 plate

5.0(10)

Colored for AMS - 0.08mm layer, 2 walls, 100% infill

10.8 h

1 plate

Boost

136

191

132

Released

Description

PUZZLE - Millennium Falcon

Note: The blue is a splash of colour for the puzzle, feel free to change it to what ever colour you'd like. Please share you colour variations for everyone else as well! I've included a preview of what green or red would look like for you.

The Puzzle Lid for this puzzle can be found here:
https://makerworld.com/en/models/465481#profileId-374315

The Puzzle Box bottom can be found here:

https://makerworld.com/en/models/446736#profileId-353234

And other puzzle files I have created can be found here:
https://makerworld.com/@CanadianGamer/collections/988102

-----------------------------------

If you're looking for a commercial license to sell my prints, or to make a custom design request, please head over to my Patreon where those options are available: https://www.patreon.com/CanadianGamer3DPrintsEDM

-----------------------------------

***IMPORTANT***

In my print profile the files are set up to make the puzzle. If you load my print profile, be careful about adjusting the locations or you may change the puzzle cut. If you download the files, you will need both the STL and the Puzzle Cutter, and you will need to cut the puzzle yourself.

In my print profile I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!

If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position

Please post a picture of your printed copy! I'd love to see it!

— Printing Instructions---

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Basic Marine Blue Transmission Distance: 3
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Blue
At layer #18 (1.52mm) swap to Silver
At layer #23 (1.92mm) swap to Jade White for the rest.

the empire strikes back

disney

george lucas

Comment & Rating (33)

@I_Epic

Print Profile

Adaptive Layers, MF 100% infill

I printed mine with a red splash color and it came out great! However, this was my first hueforge and I used a cheap red filament, so it looks slightly transparent in certain sections and didn't hide all the black. Totally my fault, but I've learned my lesson and won't use cheap filament on hueforges again :)

The designer has replied

@CanadianGamer

thanks for rating and sharing! it looks great, and because the red is a splash colour you still end up with a cool effect even with more transparency.

(Edited)

@darthgrom

Print Profile

Adaptive Layers, MF 100% infill

magnificent

The designer has replied

@CanadianGamer

thanks for rating and sharing! this is one of my favorites :)

@damageplan98

This puzzle is sweet! My first puzzle on the X1C. For some reason I can’t figure out how to leave stars now lol.

The designer has replied

@CanadianGamer

I see you found the stars! Thanks for the compliment and sharing and rating the files! :)

@user_3089725730

Print Profile

Adaptive Layers, MF 100% infill

love it!

The designer has replied

@CanadianGamer

thanks for rating and sharing your colour choices!

(Edited)

@Truck

Hello, I would love to print this but I cannot get the colors right at all. I follow your instructions, but the layer heights are different on my end. For example, you say change to blue at layer 11 (.96mm) but for me .96mm is layer 8. And then for some reason on the last layer (24) it wants to put out black again when I specified it to be white. Photo 1 is layer 23 and Photo 2 is layer 24. I am using an A1 and when I change to my printer, I transfer the settings over.

The designer has replied

@CanadianGamer

Follow the 0.96mm if you opened my 3MF file. As mentioned in the description I used adaptive layers to speed up the print. "This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!" If you just want to change the blue, you don't even have to change anything on the profile though. When you hit print, it will ask you to confirm the filaments, and you can just select any slot for the blue and it will use that colour even though it doesn't match colours. I would close the file you have open, and open and slice it again, it looks like you have a final layer of black at the very end right now.

(Edited)

@successatlast10

where can I get puzzle cutter from please

The designer has replied

@CanadianGamer

I included it in the STL downloads, but its also in the 3MF file to cut the pieces. Enjoy!

@SailorJerry81

could this be cut with a cricut ?

@CanadianGamer

Replying to @SailorJerry81 :

I don't know, its a STL file, and not an SVG, what types of files can you work with in design space on the cricut?

@KlKo57

Hello, that's a wonderful idea and gift for others, thank you very much for that. But I have a problem with the Puzzle Box Lid - Millennium Falcon and not with the Puzzle Box Lid - Death Star. I can't set the colors, the option isn't selectable.

The designer has replied

@CanadianGamer

you are using my 3MF file? you should be able to select / assign colours after you slice the file and send it to print

@KlKo57

Replying to @CanadianGamer :

thanks, was my mistake ;)

@CanadianGamer

Replying to @KlKo57 :

ok I’m glad it wasn’t the file :)

@samdenn

Boosted

This is awesome, keep it up!

The designer has replied

@CanadianGamer

Thank you for the encouragement and the boost!

@KlKo57

It would also be cool to have a mounting plate for assembling the puzzles to hang up or stand up. I'm looking forward to the next Star Wars puzzle ;)

@damageplan98

Print Profile

Adaptive Layers, MF 100% infill

The designer has replied

@CanadianGamer

Thanks for rating :)

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.