It's Me, Mario!
It's Me, Mario!
Print Profile(1)
Description
For *exclusive* FREE models (including the Darth Vader pictured below) visit my Patreon in bio or http://patreon.com/JustBe3D) also if you are interested in members only models, or a commercial license to sell your physical prints of my models.
Can be rescaled just remember not to change the Z axis.
I print with a variable layer hight but just uploaded the standard 0.16 base with 0.08 layer heights.
I put a single layer of black under my red. I think it makes the red look deeper and move vibrant, But it is not required.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 1.4
PLA Overture White Transmission Distance: 4
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Red Transmission Distance: 8.2
PLA Overture White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Space Gray
At layer #17 (1.44mm) swap to White
At layer #21 (1.76mm) swap to Black
At layer #22 (1.84mm) swap to Red
At layer #29 (2.4mm) swap to White for the rest.
Comment & Rating (11)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
