Print in place hooks with an articulating ball joint.
Full scale uses a 0.6mm free motion tolerance so it's easy to print at any scale.
Fidget size provided (30% scale) for a satisfying snap joint.
Fusion design and STEPs in the “Download STL” button for those that are curious.
The weight capacity of this hook is dependent on the size you scale it to, the filament you use, slicer settings used, the printer and the user.
I started getting layer separation at around 15 lbs (~7kg) in the uploaded profile using Bambu PLA in my testing for the standard size hooks.
Never lift overhead or use as a safety device.