Credits: MirageC (https://github.com/MirageC79) and Vez3D ( https://github.com/VzBoT3D)
Note: STEP file of the Tentacool works in Onshape. It doesn't work in Fusion360, model is damaged (incompatibility?).
Tentacool source file link: https://cad.onshape.com/documents/522c85a5f8ca8fd8cdc3a4b3/w/a8a8225c4d48cc1632a86d2e/e/8c28082b4feac7e48f6a7243
Prepositions:
BOM:
Print information:
I used Prusament PCCF, 0.4mm nozzle diameter and 0.2mm layer high. A few supports are necessary for proper Tentacool print. Look at attached pictures.