Saw Movie Color Hueforge Filament Painting

To print this model you DO NOT need AMS.

ATTENTION :

If you have AMS, print the profile directly. If you do not have AMS, you must add a pause for each color change.

The model is configured for optimal printing, if you want to scale it you can do so respecting the Z axis (thickness)

Filaments Used:
1 - PLA Black Smart Material Reclycled Transmission Distance: 0.6
2 - PLA Red Smart Material Reclycled Transmission Distance: 4.7
3 - PLA Yellow Smart Material Reclycled Transmission Distance: 9.8
4 - PLA Cold White Smart Material Reclycled Transmission Distance: 6.6
This print uses 4 unique filaments

Swap Instructions:
Start with NEGRO
At layer #8 (0.72mm) swap to ROJO
At layer #14 (1.2mm) swap to AMARILLO SM
At layer #18 (1.52mm) swap to BLANCO FRIO for the rest.

Para imprimir este modelo NO necesitas AMS.

ATENCION :

Si dispones de AMS imprima directamente el perfil, si no tiene AMS debe agregar una pausa en cada cambio de color.

El modelo esta configurado para una impresion optima, si desea escalarlo puede hacerlo respetando el eje Z (grosor)

Filamentos utilizados:

1 - PLA Negro Smart Material Reclycled

2 - PLA Rojo Smart Material Reclycled

3 - PLA Amarillo Smart Material Reclycled

4 - PLA Blanco Frio Smart Material Reclycled

Instrucciones de Filamento:
Comienza con Negro
En la Capa 8 (0.72mm) cambia a Rojo
En la Capa 14 (1.2mm) cambia a Amarillo
En la Capa 18 (1.52mm) cambia a Blanco Frio hasta el final.