Hi everyone,
This is a car keychain bottle opener. A bit of a mouthful, but it works. All you have to do is load this in your slicer and print. This is a super easy and fun print. You can customize using the blank one in your software. Or just print it blank and give away as a gift!

How to print:

• Material: I used PLA it's really strong.
• Infill: 50% works quite well.
• Support: None
• Brim: Yes.
• Raft: Doesn't matter
• Print time: Roughly an hour 40min.

Enjoy the print and the beers. Cheers!