Extra service "Tiger Shark Mark-Ⅱ" released!!

https://cults3d.com/en/3d-model/art/flexi-tiger-shark-mark-print-in-place

If purchased, commercial use license and 3mf files are available.

[Update]
---2024/05/09---
I used the “Import from Third-party” function to import the model back from Thingiverse.

This is a Flexi Tiger Shark. It can be assembled simply by inserting the head part into the main body. The small size and short printing time make it ideal for trial 3D printing. Print in Place with no supports.

Please take pictures of your Flexi and share them with us!

Print Settings

{Recommend: Bambu Lab Printer}
Layer Height: 0.2mm
Seam Position: Aligned
Wall Loops: 3
First layer: 30mm/s
Outer wall: 30mm/s
Prime Tower Width: 10mm
Prime Volume: 10mm^3
Prime Tower Brim Width: 0mm

⚠Warning⚠

Be careful in environments with young children and pets!
This model contains small parts.
If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury.
If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!
Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries.
In addition, debris from damage to the model may be accidentally ingested by infants or pets.
If the model is damaged, dispose of it immediately.

Store them in an appropriate place.
After 3D printing, store the model in an appropriate place out of reach of young children and pets.
Proper adherence to the precautions will ensure safe use of the model.

💰Commercial Use💰

This model is not available for commercial use under "CC BY-NC-ND 4.0" below.
Therefore, I am selling the upgraded model with additional detailing and a license for commercial use. If you want to sell my model commercially, please check my Cults or Etsy.