Lion-Fountain Backflow Burner
Lion-Fountain Backflow Burner
3D
Published 2024-05-07T13:43:23+00:00
Many believe drinking from the fountain will grant you the courage of the lion, but in fact you already need to be brave in order to drink from it.
(Disclaimer: this is a joke, do not attempt to drink any incense residue)
For the incense burner, We recommend place a larger washer (link below) in the top bowl. The washer must have a hole and some distance to the bottom so that the incense burner can release the smoke downwards into the bowl.
***Please do not leave the object alone when the incense burner is lit.***
** SUGGESTION LINKS **
Ceramic Spacer/Washer 6.5x24x9
This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 17 Hour 13 Minutes (will vary accord to you printer model)
Approximately Height: 17 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt.
| Date published | 07/05/2024 |
| Technology | FDM |
| Support Free | YES |