Capitan Phasma with Gold Blaster
Capitan Phasma with Gold Blaster
Print Profile(2)
Description
I do print all of my models and that takes time and filament.
Can be rescaled just remember not to change the Z axis.
I print with a variable layer hight but just uploaded the standard 0.16 base with 0.08 layer heights.
*IMPORTANT*
I used the 5 color verson for my print. If you want to get the gold look you need to use 5 colors. I included the 4 color version as well but it will come out as more of a dark yellow rather than gold.
Gold is one of the harder colors to get right but this one came out well.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 1.4
PLA Overture White Transmission Distance: 4
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Orange Transmission Distance: 7.4
PLA Elegoo Yellow Transmission Distance: 7.2
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Space Gray
At layer #15 (1.28mm) swap to White
At layer #17 (1.44mm) swap to Black
At layer #18 (1.52mm) swap to Orange
At layer #24 (2mm) swap to Yellow for the rest.
Comment & Rating (3)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
