Ghostbusters LED Lamp by Codyinbody3

Codyinbody3

Art>Other Art Models

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

(Lightbox Profile) 0.22mm layer, 2 walls, 5% infill

Designer

7 h

3 plates

4.8(14)

Ghostbusters 60% lamp - 0.2mm layer, 2 walls, 5% infill

3.4 h

3 plates

Boost

100

134

126

Released

Description

Here's another custom lamp I had a friend reach out and ask me to make. I thought I'd upload it for you all to print as well. Enjoy!

Settings: The print profile settings are setup specifically for the frontplate only so you won't have wisps or colors bleed into each other or have those random dots of a darker color that you can only see when you get a light behind it. These are the best settings I've found to take care of that out of the 1000s of lamps I've printed. When going to print the backplate, be sure to change the filament settings. You'll want to change the first layer and other layers temps back to 220 on both. Then you can choose to take off retraction and zhop but it won't mess with the quality either way.

Comment & Rating (19)

@ledvinaphotogra

Print Profile

(Lightbox Profile) 0.22mm layer, 2 walls, 5% infill

Great lightbox, very sharp, easy print!

@DarDoi

Boosted

Print Profile

(Lightbox Profile) 0.22mm layer, 2 walls, 5% infill

perfect but need more temp o have a good first layer.

@lpovoa

very good

@JOJOTHEMULET

Boosted

Print Profile

(Lightbox Profile) 0.22mm layer, 2 walls, 5% infill

très joli. print sans problème et rendu top

(Edited)

@mafakasit

Print Profile

(Lightbox Profile) 0.22mm layer, 2 walls, 5% infill

(Edited)

@Fabiok22FVDesig

HI! sorry for the stupid question... why don't you use PETG for lamps? Couldn't PLA warp?

@user_2012557523

Boosted

The LEDs don't heat up so much that they can melt the PLA.

@Borjacia

Print Profile

(Lightbox Profile) 0.22mm layer, 2 walls, 5% infill

muy bien acabado y la tapa encaja y se sujeta perfectamente

@mapalmer

What LEDs do you recommend? about to start the print soon and want to know what LEDs to order.

@user_2319487226

Boosted

Print Profile

(Lightbox Profile) 0.22mm layer, 2 walls, 5% infill

turned out great! thanks!

@user_3046833140

Boosted

printed perfectly

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

GARFIELD LIGHTBOX

fasivaa

Mushroom House Lamp

wuguigui

176

229

Jack Daniels Bottle Lamp Base

3ddruckrob

Light Ghostbusters

xaviferrer1