A1 Mini cover for PTFE Tube Connector holder
Copyright Claim
A1 Mini cover for PTFE Tube Connector holder
Boost
25
54
18
GIF
Print Profile(2)
0.16mm layer, 2 walls, 15% infill
Designer
10 min
1 plate
0.08mm layer, 2 walls, 15% infill
11 min
1 plate
Boost
25
54
18
0
81
33
Released
Description
A1 Mini cover for PTFE Tube Connector holder |
| If you use the PTFE Tube Connector of the A1 Mini in a different location and want to cover the connection. |
Works well together | |
A1 Mini handle with original spool holder
You can mount the original spool holder on this handle and choose between a fixed and modular variant for the PTFE guide. Best of all, you save space on your table.
|  |
Flexible cable clip with 360 degree rotation
Flex cable clip holder with 360 degree rotation - perfect for 3D printers and e.g. Bicycle bowden cables or for movable cable management.
|  |
Comment & Rating (18)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
A perfect tight fit and it looks good :)
Printed with the Handy App - Basic PLA - Smooth plate
The designer has replied
1
Reply
looks good and thanks for your feedback 💪
0
Reply
Works great! Had to scale down 99.5% to get it to fit nicely, great model! Also added a print profile if ever
0
Reply
how do I even safely get the tube connector off?
The designer has replied
0
Reply
Haven't tried yet, but looking at the back of the "power head" (where the tube connector is mounted) reveals 2 screws. It looks like the plate could be removed, allowing access to the base of the connector, which I'm assuming are locking tabs.
1
Reply
Replying to @user_1162603232
I just pulled it off.
0
Reply
You have to open the back cover and then unclip it from the inside
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
quick and easy print
The designer has replied
1
Reply
Thanks for your feedback 💪
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Super!!!!
The designer has replied
1
Reply
thanks for your feedback 💪
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
Thanks for your feedback 💪
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
thank you for your feedback 💪
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
thank you for your feedback 💪🏻
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
1
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld