4500HP SMX Steve Morris Racing Twin Turbo Billet v8 Engine 1/8 TO 1/25 SCALE

Experience the power of the 4500+ HP All Billet Aluminum 525 cubic-inch SMX Steve Morris Racing Engine with this meticulously detailed 3D model. This engine, renowned for its use in street-able Pro Mods, and Drag Racing, is a pinnacle of performance and engineering.

Designed to be printed in both FDM (1/12 Scale and above) and Resin (SLA), this model is a must-have for enthusiasts looking to add the best, most detailed Pro Mod high-performance engine replica to their collection.

4,500+ HP Full Water Jacketed PROVEN Endurance Pro Mod Engine! NOT Just For Cooling Between Rounds. Designed for real-world use, this engine is not just for show; it's meant to be driven anywhere, anytime. It's the same record-breaking V8 that powers Cleetus McFarland's Chevy El Camino, making it the most powerful street engine available from Steve Morris Racing. Use the Chevy Gearbox Bolt Pattern, so wide choice of gearboxes that will fit is available.

You need to print about 39 STL's to build the complete model. About 70 STL Files are included because you have options for FDM and Small or Large Scales etc. (Some STL Files included are options, making about 39 to print). Make's you an impressive and fun to build model, that can be used for display by itself, or fitted to your Pro Mod / Hot Rod build. A completely assembled STL file is included as to be used as a assembly guide. Designed to be Printed in Both FDM (1/12 Scale and above) and Resin (SLA).

I give the files in Full Size Scale (Real Life Size) so you can scale it easily to your needs and modelling scale in the slicer. Conversion to your required scale is much easier from full size. Example:1/10 Scale will be 10% size in the slicer. An fully assembled STL file is included to serve as an assembly guide. (See Scale Guide in Settings Below)

Please note that this is an advanced project requiring the printing of separate parts, similar to a model kit. You'll also need suitable-sized electric wire for spark plug wiring and pipes (Pipe STL files included).

Copyright for the SMX 525 ci Big Block V8 3D design is retained by BuildandClick.com. This model is intended for personal use and is not to be redistributed. Commercial use, including selling prints, requires a commercial license obtained by contacting BuildandClick.com."

3D printing settings

3D printer file information ( 560 MB Zip File)
Prints Good with Filament (FDM) Printers in the bigger scales.
SLA or smaller nozzle (0.2mm) recommended for below 1/18th Scale.

For 1/6, 1/8, 1/10, 1/12, 1/16, 1/18, 1/24, 1/25 Scale.

Files come Actual Full Size. Scale Factor Table below:

1/6 = Scale to 0.166 (16.6%)
1/8 = Scale to 0.125 (12.5%)
1/10 = Scale to 0.100 (10.0%)
1/12 = Scale to 0.083 (8.3%)
1/16 = Scale to 0.062 (6.2%)
1/18 = Scale to 0.055 (5.5%)
1/24 = Scale to 0.0416 (4.16%)
1/25 = Scale to 0.040 (4.0%)

Please Note: Some STL's is marked "LH" and "RH" this is for left and right viewing the engine from the FRONT as when a mechanic works from the radiator side.