Best Mom Ever light box or wall graphic.

Read Me Before Printing. This had very tight tolerances when putting together. I inserted Mom lettering flush with front, I than placed front cover on while wiggling letters in place. This is honestly the hardest part. I tried to lower all pieces in place to constantly make them flush while being careful. I had the hardest times with the M's. Keep them flush get front cover on and snap lettering in. I had to be firm but not breaking front cover. Letters are actually pretty strong. I printed with .2mm nozzle had a couple pin holes on the rose. Good luck it looks great when completed. You could print lettering and back with .4mm nozzle to speed things up but at your own risk due to possible tolerance change. I added a 7mm hole on back to hang on a small nail. I also added a 13mm x 7mm led slot. Both can be changed or deleted under objects tab in bambu slicer to fit your needs.

Filaments used Overature matte white, Overature matte green, Bambu basic red, and bambu basic magenta.