Wheel adapters for IKEA Utesepelare
Wheel adapters for IKEA Utesepelare
3D
Published 2024-05-01T17:19:06+00:00
You wish to have a mobile computer desk? You like IKEA stuff? You live in North America where you can only buy Imperial stuff at the hardware store while IKEA stuff is all metric? I know... really specific need. Though it was one of mine and now I share it to the community.
You will need some wheels (I used 50mm rubber one) and ¼ x ¾ bolts with nuts and washers. You will have to attach the adapter to the leg using the special bolt from the IKEA kit then attach the wheel to the connector. Following the IKEA assembly plan, this will be replacing the step 1.
I made 2 versions of the adapter since the holes at the bottom of the desk legs isn't always centered. It is preferable to have the version will the 4 stoppers but 2 work just fine.
I printed the adapters with 6 walls and 50% infill using Black PLA-CF to make them strong.
There you go! A nice mobile computer desk.
Printer brand: Bambu Labs
Printer: Bambu X1C
Rafts: Yes
Supports: Yes
Resolution: 0.2 mm
Infill: 50%
Filament brand: Bambu Labs
Filament color: Black
Filament material: PLA-CF
| Date published | 01/05/2024 |