Hey y'all. I designed this trippy little acoustic phone amplifier so you can jam out all summer long even if you don't have a bluetooth speaker.

It prints in place with no assembly required. Hinged kickstand allows you to rock the amp back for better projection over focused area.

I used to listen to my podcast in the shower by balancing my phone on the towel rail and pointing the speaker towards the curtain. Even with the volume at max it was still difficult to hear everything over the running water.

Using this acoustic amplifier, I was able to safely place it on my sink counter and still hear every word in crystal clear detail. It kept my phone safe and amplified it without the need for batteries or plugging into an electrical outlet. I hope y'all enjoy it as much as I do.

It was designed around an iPhone 13 inside an Otterbox. But I left some play in there so it should be able to work with most iPhones and other phones with downward facing speakers. I've had a person with a Samsung S22 Ultra in an Otterbox get a decent fit by upscaling it to 111%. So you can try adjusting the scale to fit your phone if you have a larger model/brand. You can try to scale it down but the hinge may weld itself shut if made too small.

The phone goes into the slimmer slot, The photos of it with a phone inserted were actually provided by the person mentioned above. So that's how it looks when scaled up to 111% with a Samsung S22 Ultra docked. Shout out and big thanks to Joshua from the 3D printing Facebook group I'm in for testing this out.

Prints at 0.2mm layers with a 0.4mm nozzle.

10% Gyroid Infill

3 Walls

5 or 6 Top/Bottom Layers

Feel Free to experiment with the setting in the .3mf. These are just my preferred settings for PLA/PLA+ but it can certainly be printed however you like.

No Supports required.

Thank you for checking out this file. You can find many more trippy hippie STL's over on my profile. Everything from lamps to flowerpots. Please like and follow for more psychedelic designs and home accessories.

Happy Printing!!!