Layer Height: 0.2mm

Nozzle: 0.4mm

Platform Infill: 25%

Top uses 25% infill. Base uses 40% infill to save on time, but you can increase this to add a little more weight.

Required Parts: 608 Bearings (ZZ, 2RS, Open, Ceramic, etc, any kind will work) You might be able to use printed bearings but I haven't tested it, and wouldn't recommend it because you need the weight from the bearing to keep it stable.

If you want it to be more stable, you could print some TPU feet and put them on the bottom to make it a bit more stable.

I've included profiles for 170mm and 240mm. I have no clue how well they will spin since the bearing is only 8mm wide. Please post feedback if you print these and they work properly. Tolerance should be identical to the 130mm.

If you want a custom size, please let me know and I'll make one for you.