If you have a Luna Cycle seat extender on your Surron X Lightbee, this creates a large gap between the battery cover and the stock seat, exposing the latch and looking shabby.
This cover simply attaches to the two outboard screws of the latch plate and covers up the gap. You might need slightly longer M5 or M6 screws. I think I used M5 x 18mm and nylock nuts.
I printed it on end with the side that is nearest the battery cover facing the build plate; with support turned on. I printed in ABS for a nice strong part.
Link to Luna Cycle surron X lightbee seat extender: https://lunacycle.com/luna-lift-kit-surron-seat-riser-extenders/