Description

A Wolverhampton Wanders Football Club, logo turned into lightbox.

Prepare the Model:

• Download or open the model in Bambu Studio / Mobile Handy App.

Check AMS and Filament:

• Ensure you have enough AMS for colors. This design has 3 colours.
• Arrange filament colors in AMS slots as you require them.

Printing:

• Print Lightbox Plate 1 “Coloured Body"
• Print a “Backplate”. One has hanging hole, one does not.

Optional Brightening:

• Line the back plate with aluminum foil tape for a brighter light.

Select LEDs:

• Decide on type, color, and features.
• Look for power source options and length customization.

I prefer to use LED strips, that have a remote and USB connection. Example at the end.

LED Installation:

• Test the LED strip before starting.
• Thread the LED strip through the lightbox.
• Apply the strip to the inner wall.
• Optionally, secure with some form of adhesive but in most cases the adhesion stripe on the leds are enough.

Closing Up:

• Align and squeeze the back plate onto the lightbox it.
• Repeat around the lightbox until tight.

Finish:

• You're done!

Products used in making:

• Valletock Battery Pack & USB Powered RGB LED Strip Lights
• 48MM X 10M ADHESIVE ALUMINIUM FOIL TAPE
• ELEGOO PLA Filament (Yellow/Black/White) (Any colours/brands should work).

This post contains Amazon affiliate links. As an Amazon Associate, I earn from qualifying purchases. This means that if you click on the links and make a purchase, I may receive a small commission at no extra cost to you. This helps support my work and allows me to continue creating content. Thank you for your support!