Son Gokū - Goku

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 3.2mm and the Actual Depth is 3.2mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun ePLA-Lite Red Transmission Distance: 6
PLA+ Esun ePLA-Lite Yellow lite Transmission Distance: 10
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #24 (2mm) swap to Yellow lite for the rest.
Thank you!!