Hueforge print of Bayley win at Wrestlemania XL from WWE with frame so you can use it like a table photo frame or even hang on the wall !
REMEMBER TO DOWNLOAD AL THE 3MF → CLICK ON DOWNLOAD STL !
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Sunlu Purple Transmission Distance: 6
PLA PolyTerra Pastel Ice Transmission Distance: 1.5
PLA PolyTerra Cotton White Transmission Distance: 2.5
Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Purple
At layer #13 (1.12mm) swap to Pastel Ice
At layer #19 (1.6mm) swap to Cotton White for the rest.
Glue the frame in the back and connect the supports with two 3x30 dowel pins:
https://www.amazon.com/Unifizz-Stainless-Support-Shelves-Silver/dp/B0CZLGY3B3/ref=sr_1_19?sr=8-19
If you want to hang it on the wall glue in the frame two sawtooth picture hangers like these:
https://www.amazon.com/Sawtooth-Picture-Hangers-Solutions-Paintings/dp/B07L2NSJ2B/ref=sr_1_3?sr=8-3