Hueforge print of AJ Styles from WWE with frame so you can use it like a table photo frame or even hang on the wall !
REMEMBER TO DOWNLOAD AL THE 3MF → CLICK ON DOWNLOAD STL !
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA+ Sunlu Sunny Orange Transmission Distance: 8
PLA Sunlu Meta White Transmission Distance: 8
PLA PolyTerra Cotton White Transmission Distance: 1.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #8 (0.72mm) swap to Sunny Orange
At layer #17 (1.44mm) swap to White
At layer #26 (2.16mm) swap to Cotton White for the rest.
Glue the frame in the back and connect the supports with two 3x30 dowel pins:
https://www.amazon.com/Unifizz-Stainless-Support-Shelves-Silver/dp/B0CZLGY3B3/ref=sr_1_19?sr=8-19
If you want to hang it on the wall glue in the frame two sawtooth picture hangers like these:
https://www.amazon.com/Sawtooth-Picture-Hangers-Solutions-Paintings/dp/B07L2NSJ2B/ref=sr_1_3?sr=8-3