Hi everyone 👋,

This container is designed for the IKEA Skadis Boards using the T-Clip system mounting.

It roughly measures ~23.5cm (width) x ~12.5cm (depth / front to back), ~10cm at its highest point and ~6cm at its lowest point.

This model is using the Skadis T-Clip System for mounting. If you choose to not use the included print profile, you will need to print your own T-Clips. The T-Clips included in the profile are the T-Clip for Painted Skadis.stl ones.

The container has 2mm walls resulting in a total of about 250g of filament, so a bit on the “heavy” side, but I really like the “quality” feel of it.

I was inspired by the Skadis slanted 5 sectioned container which I initially wanted to remix to use the T-Clip System, but I encountered some issues with some fillets, so gave up and started this one from scratch.

This is my first upload to any platform, so please be kind and I really hope this will be of use to you 😊.

If you found this useful and printed it, I would be absolutely delighted if you could leave a nice word, even a photo of your result ❤️.

Thank you and Happy Printing!