If you don't have ams, change “color switch” to “pause”.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
SUNLU Black
SUNLU Silver
Kingroon Grey
SUNLU White
This print uses 4 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Silver
At layer #13 (1.12mm) swap to Gray
At layer #20 (1.68mm) swap to White for the rest.

Support stand Hueforge: LINK