HSW Scalpel/Hobby Knife Holder

This model has been designed to hold a scalpel/hobby knife with the blade safely held in a downwards position. Two vertical channels have been created in a cross pattern to make it easier to insert the blade into the holder.

The model has been designed in two different styles. The first style does not require any HSW adapters and mounts directly into the HSW board. The second style requires standard HSW adapters.

Each model has been created in two sizes, one with diameter 12mm and one with a diameter of 14mm.

Diameter (D) 12mm/14mm

Print Settings:

All parts are printed in an upright position with no supports and can be printed in either PLA or PETG

• Material: PLA/PETG
• Layer height: 0.2
• Perimeters: 4
• Infill density: 25%

Full insert (no adapter required)

Partial Insert (adapter required)