Golden Wolf

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 142.86x201.42mm in size
You may print at higher layer heights below the Min Depth of 0.88mm
The Max Depth is 3.2mm and the Actual Depth is 2.8mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Sunlu Light Gold Transmission Distance: 3
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Grey
At layer #15 (1.28mm) swap to Light Gold
At layer #20 (1.68mm) swap to White for the rest.
Thank you!!