NO support needed.

Make All your herbs easy in the kitchen.

This planter ensures that your herbs stay fresh and hydrated.

If you dont yourself use fresh herbs, i know this will be a great gift for those who do.

The Design is quite unique, and are inspired by a old goblet (therefore the name of the model).

This planter dosnt blend into many kitchen aesthetics, so im certain that its a conversation starter.

HOW IT WORKS

The self watering planter is designed to slowly absorb water from the reservoir (This needs to be filled up occasionally).

Its a one piece print (uni body) with a clear and visible water reservoir, so you dont need to lift a inner pot, or rely on a floater to tell you how much water is left.

Simply just look in the in the reservoir, and fill it up if needed.

There are 2 water inlets in the planters, where it is recommended to use a wicking material at the bottom.

This helps to absorb water into the soil slowly and prevent excess moisture in the soil.

To much moisture can reduce oxygen in the soil, damage fine root hairs, and render the root system unable to absorb water.

You can place a couple of cotton balls / cotton wool in the bottom of the pot.

The water inlets has a light slope towards the center, so all the water is utilized

Unibody - One piece print

Basic print settings:

• Infill : 10%
• Walls: 4
• Top/bottom shell layers: 3
• No support needed

Dimensions: Witdth is about 94mm, and a hight of 133 mm.