HUEFORGE BMW M3
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Overture Gray Blue Transmission Distance: 0.8
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 4
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Gray Blue
At layer #2 (0.24mm) swap to Black
At layer #4 (0.4mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Jade White for the rest.