Monitor like full on 7 inch screen stand to incase you LCD HDMI touch screen for you Raspberry pi projects.
**UPDATE: I included a 3mm back plate increase for the Back case, due to manufacturer's difference the HDMI port prevents the case to fully close so this update should solve it.
For Assembly you need few bolts:
M3 x 6 = 4 pieces - to connect the 2 loops hinge with the back cover case.
M3 x 12 = 4 pieces - to connect the front case to the back case. (M3x14 for the 3mm increased version)
M3 x 16 = 4 pieces - to connect the base to stand (M3x14 can be used).
M3 x 18 x 4 pieces - to connect the 3 loops hinge with the stand (M3x16 can be used).
M5 x 30 x 1 - to secure the two hinges and tilt the monitor (use hex nut the tighten the screen it you want).
Enjoy.