Hueforge Steamboat Willie.
Follow this guide to make sure your profile is right.
https://wiki.bambulab.com/en/filament-acc/filament/hueforge-printing-guide
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
The Model is 75x75mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 0.92mm
Filaments Used:
PLA Generic Black ( Creality Black PLA ) Transmission Distance: 0.2
PLA Generic White ( JAYO White High Speed PLA ) Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.52mm) swap to White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.