This case fits the Bruce Le Clavier PCB by JLW
https://github.com/josh-l-wang/Bruce-the-Keyboard-the-Resources
PCB is available below:
This case was designed for PLA filament and is designed to print in 3 parts, a Top, Bottom and Bottom Insert. The bottom insert is intended to be glued in after printing.
This case requires no supports and the halves connect with 4x m2x6mm self tapping screws. The print has built in 0.1mm thick support to allow the countersink to print nicely. Break this free using a screw or screwdriver before assembly.
The switch plates are custom for this case and mount via m2x6 self tapping screws. McMaster-Carr
An internal pocket for weights was added as well.
Weights are available here:
ACCRETION 96Pcs 1/4 Oz Black Adhesive Backed Wheel Weights (24 Oz Pack)
Depending on your printer settings, the self tapping screw hole sizes or magnet pockets may need to be adjusted. I’ve included both fusion and .step files.
Feel free to mod this case or use as is for your personal use. Remixes are cool but please don't use this design or remixes for commercial purposes without permission from me.