Lockheed SR-71 Blackbird Hueforge
Copyright Claim
Lockheed SR-71 Blackbird Hueforge
Boost
3
7
4
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
4.2 h
1 plate
Boost
3
7
4
0
3
5
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 202.13x235mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Ash Gray
At layer #18 (1.52mm) swap to Jade White for the rest.
Comment & Rating (4)
All
Print Profile
0.08mm layer, 1 walls, 100% infill
Used straight blue instead of the blue gray, came out perfect! Thanks for the model!!
0
Reply
Turned out great!
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
Had a nozzle clumping issue with my a1 mini during the print. Not your fault so 5/5
0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld