Updated hueforge of my past version, this prints better with a better color selection.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x280.88mm in size
You may print at higher layer heights below the Min Depth of 0.88mm
The Max Depth is 2.6mm and the Actual Depth is 2.7mm

Filaments Used:
PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3
PLA BambuLab Matte Blue Gray Transmission Distance: 1.5
PLA Polyterra Savanah Yellow Transmission Distance: 3.4
PLA BambuLab Matte White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
Start with Charcoal Black
At layer #21 (0.96mm) swap to Blue Gray
At layer #39 (1.68mm) swap to Savanah Yellow
At layer #60 (2.52mm) swap to White for the rest.