This cryptex is an easy to print and easy to assemble model.
You need to print the spacer ring, inner letter ring and letter ring, 5 times.
My experience is that it prints fine with Bambu filament, but with other filaments it might be a bit tight on the tolerances. If the inner letter ring does not fit the outer letter ring, set the Flow Ration in Bambu slicer for your filament to 0.92.
Assembly is done as follows:
Have fun!!!
PS. There is an emergency opening mechanism to open it without the code. Comes in handy if you family or friends change the code. :-) I'll leave it as a puzzle to find this mechanism.
UPDATE 23/04/2024: Improved the end spacer assembly en thickened the outer box a bit.
UPDATE 25/04/2024: Added an inner box that block the emergency opening possibility (only use this if you are sure that you won't forget your code)
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.