Handle spool 96mm wide and diameter of 22cm

This design give the option to fix Mount to the wall or use the small bracket,
that give the option take it down

fillament is fed through the small PTFE tube which ensures,
that the spol does not fall down if there are knots on the fillerment

Fillament used for this project is Bambu Lab PETG basic

White (30100) around 101g
Gray (30102) around 148g

Print time total is 8h 15m

12 x M3 Thread Knurled Brass Threaded Heat Set Heat Resistant Insert Embedment Nut

https://kandebearingsshop.aliexpress.com/store/3862082?spm=a2g0o.detail.0.0.6fa5H83kH83kR7
5$ for 100

12 x DIN912 M3 X 16mm A2 Stainless Steel grade

https://aiscrew.aliexpress.com/store/1960312?spm=a2g0o.detail.0.0.235c0XuG0XuG27

3-4$ for 50

4 x 608ZZ 608RS Deep Groove Ball Bearing 8*22*7

https://www.aliexpress.com/item/1005005778152535.html?spm=a2g0o.order_list.order_list_main.16.364218026IlosA

3$ for 10

5cm PTFE Tube