-----------------------------------------------

柜子人系列

五抽屉版本

15CM高

手臂不可分开 且 手臂位置靠后

因为手臂靠后所以这个版本的主柜体更容易被打印了

-----------------------------------------------

推荐使用0.16mm或更高的层高来打印，以加快打印速度，

模型被设计的易于打印，你可以从主柜体的背部以及抽屉的底部发现这一点，

推荐将支撑设置为有机树且顶部z距离设置为0.12左右来获得更好的支撑效果，

模型预留了0.4mm的公差以防抽屉插入过紧，

祝你有愉快的打印体验~

-----------------------------------------------

Cabinet Man Series

Three-Drawer Version

15cm High

Arms are non-detachable and positioned towards the back

Due to the arms being positioned at the back, this version’s main cabinet body is easier to print

-----------------------------------------------

It is recommended to use a layer height of 0.16mm or higher for faster printing speeds.

The model is designed for easy printing, which can be observed from the back of the main cabinet body and the bottom of the drawers.

It is recommended to set supports as organic and adjust the top z-distance to around 0.12 for better support results.

The model includes a 0.4mm tolerance to prevent the drawers from being too tight when inserted.

Wishing you a pleasant printing experience!