Howdy!
Do you print higher-temperature, VOC-emitting, and/or sensitive filaments? If so, DS3 is the addon for you.
Introducing DS3 (Door Seal 3) for the X1/C/E & P1S 3D Printers; the first and only flexure-based door seal.
DS3 is the 3rd evolution of the original flexure based door seal, DS1.
DS3 closes up the gap between the chamber door and external panel via a moving flexure design. This allows for a positive-seal to be achieved reliably without restricting the range of movement of the door nor interfering with the printhead inside through normal printing operations.
DS3 reduces heat loss (increasing chamber temp & reducing power costs are benefits of this) and VOC emissions from the chamber without compromising looks, changing significant components, or “Door-Open” operations.
DS3 Advantages over DS1/DS2:
Printing Requirements:
These are tight toleranced but long-term durable parts; materials and printing settings are important!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.