Hueforge Wipperkotten - North Rhine-Westphalia
Hueforge Wipperkotten - North Rhine-Westphalia
Print Profile(1)
Description
Hier habe ich ein Hueforge Bild für euch aus NRW welches sich Wipperkotten nennt.Ein super schönes altes Haus mit Wasserrad an der Wupper.Ein bekanntes Foto Objekt welches es schon seit 1605 gibt und dort viel zur Geschichte im Schleiferhandwerk beitrug .Auch das orig. Bild vom Schleifkotten welches ich ca. 2018 fotografiert habe liegt bei.Die Rechte an dem Bild liegen bei mir.
Größe beträgt 200x127
Werden die Farben bei euch geändert durch die 3mf dann macht einfach einen resync, dann sollte alles wieder passen.
Drucker muss dafür aber an sein.
Freue mich über nettes Feedback oder eine Bewertung.
Und wer für dieses Bild einen Rahmen möchte, schreibt mir bitte hier über Makerworld.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Gray
At layer #16 (1.36mm) swap to Jade White for the rest.
----------------------------------------------------------------------------------------------------------------------------
Here I have a Hueforge picture for you from North Rhine-Westphalia which is called Wipperkotten. A super beautiful old house with a water wheel on the Wupper. A well-known photo object that has been around since 1605 and contributed a lot to the history of the grinding trade. Also the original image from grinding stones that I took around 2019 is enclosed. I own the rights to the image.
Size is 200x127
If the colors are changed by the 3mf then simply do a resync and everything should work again.
But the printer has to be on for this.
I'm looking forward to some nice feedback or a rating.
And if you would like a frame for this picture, please write to me here via Makerworld.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Gray
At layer #16 (1.36mm) swap to Jade White for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
