Logo Design: Toronto Maple Leafs

Details of the design:

• This has been done in LightBox Format to save filament and weight.
• The box is about 15mm deep.
• The Face consists of the logo and sides.
• The Face (0.6mm) has a thin layer called FaceBack (0.6mm), usually White, to diffuse light.
• The back consists of the Backplate (1mm) and Lip (3mm) to hold the sides. The Sides to Backplate should be a friction fit but due to humidity or your printer you may need some glue. I used E6000 or model glue and printed all in Bambu Lab PLA Basic.
• In Bambu Studio, click from Global to Objects to modify colors to fit your AMS locations.

This was done on a Bambu Lab A1 with 0.4mm Nozzle, 0.2mm Layer Height, Textured PEI Plate, Face DOWN for consistent texture, 5x5x3mm Prime Tower, reduced Flush Volume to 0.7, Wall Generator is Arachne, 15% Gyroid Sparse Infill.

REMEMBER to change the PRINTER and NOZZLE to match what you are using.