GLD-08 IOM CLASS SAILBOAT

IOM class sailboat, evolution of the GLD-07, I changed the rear deck, modified a large part of the reinforcements and internal structures, added a pot with cover for the battery and receiver which makes daily use much easier.

( note that you need an O-RING OD 52mm x ID 44mm x CS 4mm for the POT cover here's a link to find it https://fr.aliexpress.com/item/32993689269.html?spm=a2g0o.order_list.order_list_main.47.67b95e5bu2665h&gatewayAdapt=glo2fra )

I've also designed a sealing system for the listener outlets, with a volume to be filled with silicone grease or similar. It's like a stuffing box, the sheet goes through the grease and doesn't let water through.

Personally, I print it in 3 sections with an Artillery Sidewinder X1 with many modifications and Creality's Sonic Pad.

I'm attaching the files to print 3 sections with a height of 330mm and all the parts needed to assemble a complete hull ready to receive electronics, rigging and appendages.

I think it may be possible to print with other printers with lower heights, that's why I'm adding the complete hull file so that everyone can cut the hull where it suits him and make the junctions as I usually do in all my boats, you can see it here:

https://www.youtube.com/watch?v=PIZB_ArMHiQ&t=29s

Please note that this boat has been designed to accept my own keel sail design which has a particular profile, please contact me about this.

I've written the general parameters I use in the name of each file.

For the main sections, you need to regulate the flow of material to achieve a wall thickness of 0.9mm and ensure that all internal reinforcements touch each other to ensure the boat's solidity.