This Model is a Remix of TeachingTech's original which a link to can be found on this page, and includes all other necessary printed parts for use, this remix adds a dual sided stylus holder for the stylus that comes with the display he used.

Necessary Printed Hardware:

On TeachingTechs page (https://www.printables.com/model/611634-xtouch-enclosure-for-bambu-lab-p1ps/files) you will need to download and print these Files:

• adaptor.stl
• rear cover.stl

Necessary NON-Printed Hardware:

"The required ESP32 touch screen is linked on the xtouch GitHub readme.

A USB-A to USB-B micro cable approxmately 200mm in length is ideal. I speculate that a cable as short as 150mm might just reach, and if the cable was longer, the enclosure has space to tuck in the excess.

6 x M3 x 12mm countersunk bolts for attaching the rear to the front pieces.

2 x M3 x 12mm bolts for attaching the enclosure to the adaptor." (From origional post by TeachingTech)