Portable phone stand v3.0——口袋手机支架v3.0
Boost
14
21
10
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
38 min
1 plate
Boost
14
21
10
2
48
13
Released
Description
This is a portable mobile phone stand. It's the third version I've designed. This version mainly adds a charging mode. It is printed in place. The size is only 39mm×79mm×8mm. The length is smaller than the width of the phone, with adjustment function.
（这是一个的便携手机支架，是我设计的第三个版本，这个版本主要增加了充电模式，它是一体打印的，尺寸仅为39mm×79mm×8mm，长度比手机宽度还小，带调节功能。）
The first use after printing requires a little effort to move the joints.
（打印好之后第一次使用需要一点力气来活动关节。）
like this:
like this:
Comment & Rating (10)
All
很完美。另外问一下你们的机器怎么绑定国际账号的？
The designer has replied
0
Reply
去问过客服，国内账号暂时没法绑机器o(╯□╰)o
(Edited)0
Reply
Replying to @shiny_coin
那你们的打印评分是怎么评的？我国内那个手机账号登录不了make world
0
Reply
Replying to @slime7
我也是没法评分呢
(Edited)0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Nice project
(Edited)
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Came out pretty good.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
helpful tool for me and it works flawless
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld