Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.88mm
The Max Depth is 2.6mm and the Actual Depth is 2.7mm
Filaments Used:
PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3
PLA BambuLab Matte Blue Gray Transmission Distance: 1.5
PLA BambuLab Desert Tan Transmission Distance: 0.4
PLA BambuLab Matte White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #27 (0.96mm) swap to Blue Gray
At layer #42 (1.8mm) swap to Desert Tan
At layer #59 (2.48mm) swap to White for the rest.