Que bando quieres escoger? fuego o hielo? o los dos? descarga por separado el que mas te guste o ambos para disfrutar de los 2
Which side do you want to choose? fire or ice? O The two? Download separately the one you like the most or both to enjoy both
Don't make a mistake when placing colors manually
fire for one ice for another
***FIRE (fuego)***
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA Default White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #13 (1.12mm) swap to Yellow
At layer #18 (1.52mm) swap to White for the rest.
***ICE (hielo)***
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PLA Bambu Cian Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Cian
At layer #13 (1.12mm) swap to Jade White for the rest.