Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

• Filaments Used:
  PLA+ Sunlu Black Transmission Distance: 0.6
  PLA+ Sunlu Grey Transmission Distance: 2
  PLA+ Sunlu Silver Transmission Distance: 2
  PLA BambuLab Basic Jade White Transmission Distance: 5
• Swap Instructions:
  Start with Black
  At layer #9 (0.8mm) swap to Grey
  At layer #11 (0.96mm) swap to Silver
  At layer #17 (1.44mm) swap to Jade White for the rest.
  
  Looking for a storage solution for your HueForge prints? Check out my Storage Boxes here → https://makerworld.com/en/models/379912