Dimensions : 250mm x 179mm
You can scale the image, be sure to not change the Z height.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to Grey
At layer #15 (1.28mm) swap to Marine Blue
At layer #18 (1.52mm) swap to White for the rest.