Hey, everyone! Today, We are thrilled to share an exciting 3D design that will take your Bambu Lab A1 & A1 Mini to the next level.

We've created a specialized X Axis Cover that allows you to mount a remote shutter for your 4K action camera, transforming your time-lapse game.

Our 'x-axis remote shutter mount' replaces your existing x-axis cover using the same screws, so no need for extra hardware, you'll of course need a camera with the same remote shutter as we have used for this to work.

We've tested this with our own Akaso V50X, but it works with any Akaso model that uses the same remote shutter.

Affiliate Link - Akaso 4K Camera https://amzn.to/499wa3j

There are 6x ‘Triggers’ on the build plate and each is 0.10mm difference in length starting from 18.00mm.

We strongly advise you print all 6 of these.

Once you have fitted the 3D printed part and remote shutter, insert the 18.00mm trigger and start a print. If the remote button isn't pressed with the force of the extruder screw then pause the print and try the 18.10mm trigger. Continue this process until the button is pressed with the correct sized trigger.

All you need to do now is switch on ‘smooth timelapse’ in your slicer and "send it"

Its best to insert the remote shutter (or Trigger) once the initial bed level/ flow calibration is complete, this is to avoid 50+ unnecessary photos.

Our Print profile has the Bambu Lab Logo in multi-colour and is 3 layers thick. Several changes have been made to get the best results including 4 walls, 50% Gyroid infill, Arachne wall generator and supports.

The supports are within the part itself so need a little patience to remove, its a pretty solid model with no thin parts to break during removal and we have had 100% success with every prototype removing them.

Sell my prints commercially by joining my Printables Club. 

Want to say ‘Thank You’  Buy me a coffee