Panda Touch Stand with Bigger Hole for original cable
Remixed by
Copyright Claim
Panda Touch Stand with Bigger Hole for original cable
Remixed by
Boost
12
27
13
Print Profile(2)
0.12mm layer, 2 walls, 15% infill
Designer
2 h
1 plate
0.2mm layer, 2 walls, 10% infill
1.3 h
1 plate
Boost
12
27
13
1
63
50
Released
Description
Remix of “Desk stand for BTT Panda Touch with USB-C socket” (https://makerworld.com/en/models/169049#profileId-194927)
But here there is a bigger hole for your original USB Cable.
Comment & Rating (13)
All
snug fit and original cable can pass through easily. Printed in Bambu Basic PLA
(Edited)
The designer has replied
1
Reply
ok so everything it's ok ?
0
Reply
Replying to @HackMan
yep, its great!
1
Reply
Printed great thx!
1
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
Passt aber das mit den Schrauben hätte man ander lösen können
The designer has replied
1
Reply
Thank you for rating !
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
worked great 0 issues
1
Reply
Boosted
Print Profile
0.12mm layer, 2 walls, 15% infill
Perfect. You must not use the original screws for the upper part because they are too short
(Edited)1
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
Thank you for rating !
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
Thank you for rating !
0
Reply
Print Profile
0.12mm layer, 2 walls, 15% infill
1
Reply
No more
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld