Set of 3 bookmarks - Different bonsai for different people - three different designs of nature

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.3
    PLA BambuLab Matte Dark Brown Transmission Distance: 2
    PLA BambuLab Matte Grass Green Transmission Distance: 2
    PLA BambuLab Basic White Transmission Distance: 6

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Dark Brown
    At layer #11 (0.96mm) swap to Grass Green
    At layer #15 (1.28mm) swap to White for the rest.