Organize your space in a smart and stylish way with our Stackable Drawer Organizer! Designed to be quickly printed in vase mode, these organizers offer a versatile and practical solution for keeping your small (and not-so-small) items neat and within reach.
With three drawer configurations available and a multipurpose shelf, you can tailor these organizers to your specific needs. Plus, each drawer has the option to incorporate internal dividers, allowing you to further segment space and organize efficiently.
The unique interlocking and stacking design allows you to combine multiple organizers into one solid, stable structure. The trim not only adds an aesthetic touch, but also allows you to create a color-coded system for even more intuitive organization.
Whether it's your desk, bookshelf or workshop, these Stackable Organizers are the perfect solution to keep your space tidy and your items easily accessible.
⚠️ADVERTENCIA!: REMEMBER THAT THE BODY AND DRAWERS WERE DESIGNED TO PRINT IN "VASE MODE". IF NOT SELECTED, A COMPLETELY SOLID MODEL WILL BE PRINTED.
MODEL AVAILABLE FOR PERSONAL USE ONLY. DISTRIBUTION/COMMERCIALIZATION IS PROHIBITED
If you are looking for a smaller but just as stylish and sturdy Stackable Organizer, we recommend you check out this publication:
Thank you for taking the time to review our design. If you have
any questions, comments or suggestions, please don't hesitate to get in touch.
We hope the kit is to your liking!
3D printing settings
The organizers you can see in the photos are printed on an Ender 3 in PLA, with a 0.8mm nozzle, with a line width of 0.96mm and a layer height of 0.5mm. They possess an amazing strength that more than meets our needs and is optimal for a workshop type environment, for rough and intensive use.
**BODY
Approximate print times (at a speed of 45mm/s) and quantity of material required:
Estimated time: 2h 54min
Amount of material: 116gr (38.96m)
**TRIM
This particular piece was printed in conventional mode (no vase mode) as the piece does not take long to print, plus it was not designed for such a mode.
Layer height: 0.2mm
Line width: 0.88mm
Adhesion to the printing plate: Edge (since it has little contact surface).
Printing speed: 45mm/s
Estimated time: 30min
Amount of material: 8gr (2.54m)
**VERTICAL SEPARATOR
Approximate print times (at a speed of 45mm/s) and amount of material required:
Estimated time: 39min
Amount of material: 24gr (8.12m)
JACKS
Approximate print times (at a speed of 45mm/s) and quantity of material required:
LARGE:
Time: 1h 46min
Consumption: 71gr (23.94m)
MEDIUM:
Time: 1h 14min
Consumption: 49gr (16.36m)
SMALL:
Time: 46min
Consumption: 30gr (9.99m)
**DRAWER DIVIDERS
Approximate print times (at a speed of 45mm/s) and quantity of material required:
LARGE DRAWER:
Time: 28min
Consumption: 15gr (5.13m)
MEDIUM DRAWER:
Time: 13min
Consumption: 8gr (2.67m)
SMALL DRAWER:
Time: 12min
Consumption: 4gr (1.43m)
STANDING
Approximate print times (at a speed of 45mm/s) and quantity of material required:
Time: 45min
Consumption: 28gr (9.42m)
SUGGESTIONS
For optimum quality and correct printing, print files only in the orientation shown when opened in your laminator (CURA,PRUSA SLICER....).
When installing the Vertical Separator, to use the Small Drawers, you must:
Tilt it to one side and tuck it into the Body.
To lock it, you must first align the lower guide groove, then bend it slightly and lock it with the upper guide groove.
The Embellisher is glued to the Body with a little cyanoacrylate.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.
AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!
Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.
Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.